AR 10 80% completion jig request either billet or forging
Click To Enlarge

This complete jig assembly is designed specifically for AR-10 80% forgings to be used by Type 07 FFL's/Class 2 SOT's. This unit accurately locates all of the drilling holes as well as depicts the specifics of the M16 fire control pocket layouts in the AR-10 frame, so that the mil. spec. standard M16 parts kits will be able to completely function when used with specially modified bolt carriers which I will be supplying shortly (search 308 FULL AUTO on YouTube-look for the AR-10 platform). The entire 80% completion process may be easily done with only a drill press and Dremel tool for those who do not have access to a milling machine.

The accuracy of this jig is the same as for all the rest of my AR-15 jigs. This kit has M16-only shaped top plates (1 milling and 1 drilling) since its fire control pocket shape functions perfectly with both select-fire as well as semi parts kits. Drilling of the trigger slot is done only from the top guide since 80% AR-10 forgings have permanent trigger guards. This jig is designed for use with AR-10 forgings of the DPMS style which have the .275” pivot/takedown pins.

While most other jigs out in the marketplace take full advantage of the "precision slop" of an AR-10, my jigs have to be precise due to the lineup of hammer to bolt and autosear to bolt trip point.  AR's just need the hammer to be re-cocked each time, whereas M-16 styles have to be exact for proper release/catch of the hammer.

For those so inclined, many of my customers make more than one lower for their uppers; all that is required is that the F/A bolt carrier assembly remain in the upper assembly when it is moved from the semi to the select-fire lower or the select-fire version will not function.

Gun manufacturer "out-of-spec seconds” have been flooding the market lately, many of which have been over-sized in width. As a result, a new modification has been added. If the receiver is too wide, my top pieces would justify themselves to one side or the other leading to an off-center condition. Now with the current revision, the top pieces ‘free float’ from the sideplates, but are locked in place-centered with the magazine well opening which is always machine-centered for proper firearm ‘action’. Those who have purchased this unit in the past, contact me if you are interested in the upgraded replacement parts.


Instructions with color 3D cutaway CAD drawings which include all listed (.001”) measurements are sent via email upon shipping confirmation after the sale. Hardened steel drilling bushings have been inserted into the sideplates for the hammer pin, trigger pin, auto-sear, as well as the fire select switch.


 

Pictures shown were done with some brass tubing to prove my products’ accuracy with a DPMS factory-produced Law Enforcement / Government Use Only 9mm select-fire lower. Note the protrusions pass completely through both jig sideplates as well as all fire control holes. The quality of all aspects of these kits will give the utmost confidence for the completion of your 80% receiver. Take the time to notice all of the details including the engraving on the parts themselves in each of these photos. Further details are on the YouTube videos above. Jig/template assemblies and all parts in the photos are included (lower receivers and/or lower receiver parts kits and tools are not included).

This fixture may be lawfully owned by anyone, but ALL NFA RULES APPLY regarding the use of some of the features incorporated into this product. You (the purchaser) are solely responsible for how this item is used and I (the seller) shall not be held accountable for any misuse of this drilling/milling jig by you (the purchaser), whether Class II or not. It is important to remember that to fully comply with ATF’s “home made” rulings, make certain that whatever manufacturer’s 80% lower you decide to start with has not had any type of prior work done (even including work done by a friend) in the fire control pocket area (which includes any kind of top, bottom, or side holes, marked holes, or even depressions/grooves). If it has, it would no longer meet the 80% criteria and therefore would already be classified by ATF as a live firearm and your work on it (unless you are already a Class II manufacturer) would immediately put you (the purchaser) at risk for violating the Gun Control Act.

I do not list these items on Gunbroker unless they are ready to ship on the following business day after receipt of funds. All parts included are either “New or Old Testament Scripture Engraved”, if that offends, please purchase another product from another vendor. My products are made in America, by Americans, for Americans.

Shipping is $20 by USPS priority mail. 

This jig along with all of the others that I design, manufacture, and sell, was “over-engineered” for those who value their time and money. Since I have attempted to foresee and surmount any and all possible errors which could happen during your construction(s), the possibility of your making mistakes approaches zero.

Nothing is more disappointing than a mishap that requires a replacement receiver or part. Not only is there a monetary loss, but there is also the frustration factor due to the lost time in the work thus far, perhaps a broken tool or fixture, then there is the wait involved for the replacements to arrive from the other supplier via shipping. Now what should have been reasonably fun has become work. Those frustrations only follow my competitors’ sales (if you can call them competitors), but not my clients. That being said, if you are unsure of your milling capabilities, let me remind you that this jig is made of plastic and is NOT designed to be a machining tool stop. If you hit plastic with a high speed steel mill bit at 2,000RPM, the plastic will always shatter, which would be defined as pilot error.

In my efforts to make this the finest, most accurate jig available, I continually re-examine my product line and I also listen to suggestions by my customer base. That being said, there is always the possibility that an update/revision has been incorporated and the product may have changed in either shape or color from what has been pictured. Regardless, the functionality for which the jig was designed for will ALWAYS be enhanced with each revision.

 

To see videos depicting both this item and the rest of my product line, click the link below.

https://youtu.be/Oq8WIf-2RKo

https://www.youtube.com/user/208307


For those who are curious about what the Bible says about “gun control” 2000 years ago, look up Luke 22:36. Thank you for your attention.

Sales outside of the United States have to be transacted via telephone with credit card information exchanged.  Extra shipping and insurance fees as well as paperwork filings are involved.

 

After purchasing my jig, your credit card statement will show the following as the vendor:

 

ESP  or  EXTRA SENSORY PROTECTION 913-341-8564 KS

 

 

Further critical discovery topics for you and your families: Revelation 12 occurs on Sept 23, 2017, Feast of Trumpets, Rapture, Jubilee years, Blood moon Tetrad, solar eclipses

 

 

 

An addendum for those who understand:

 

 

 

I was a pre-trib person. I am very disappointed to say that “window” has now closed. Therefore the next 7 years are only going to get increasingly difficult. It is now your responsibility to do what is necessary to protect your loved ones as we move forward.

 

 

 

I was faithfully hoping I would get to miss all of this.

 


 

 

 

AR 10 80% completion jig request either billet or forging

Price: $215.00
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review